Date(s) - 10/10/2019
2:00 pm - 4:00 pm
21031 Ryan Rd.
Warren, MI 48091
The Michigan Masonry Coalition is presenting a series of Masonry Contractor Technical Programs. These programs are for you and your staff, to gain a deeper understanding of ASTM Standards and TMS requirements. Below you will find the first in our series. The entire series is attached in the PDF.
Mix Design & Testing – Representative from St. Mary’s Cement or Redi Mix
In a recent survey by the Portland Cement Association, Mortar and Grout for Masonry Construction is sampled and tested improperly 89% and 56% of the time, respectively.
This presentation will provide guidance regarding;
• Proper use of Specification ASTM C270 and Test Method ASTM C780 for evaluating masonry mortar produced in the laboratory and at the construction site.
• Proper use of Specification ASTM C476 and Test Method ASTM C1019 for evaluating masonry grout produced at the construction site.